SEAT Workshop Service and Repair Manuals > Leon Mk2 > Power unit | 4-cylinder TDI diesel engine with pump injector unit, 2.0 litre and 2v, mechanics | Engine lubrication | Cooling system components: Removing and installing | oil level and oil temperature sender G266 : Removing and installing

oil level and oil temperature senderG266: Removing and installing

oil level and oil temperature sender -G266-: Removing and installing

Removal:

–	Drain engine oil → Booklet101.

–	Unplug connector -3-.

–	Remove bolts -1- and detach the oil level and oil temperature sender -G266--item 4-.

Fitting .

Installation is carried out in the reverse order, noting the following:

Note

Renew seal -2- and self-locking bolts -1-.

–	Fill up with engine oil and check the oil level → Booklet101.

Tightening torque

Component

Oil level/oil temperature sender -G266- to sump

10 ¹⁾

l	¹⁾ Renew bolts.

SEAT Workshop Service and Repair Manuals