seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Valve stem seals: replacing|Install > < Valve stem seals: replacing

Leon Mk2

Remove
Remove
(With the cylinder head installed)
–  First remove the main toothed belt → Chapter.
–  Remove the camshaft housing → Chapter.
–  Remove the rocker arms, together with the support elements, and place them on a clean surface.
Make sure that the rocker arms and the support elements are not swapped.
–  Remove the sparkplugs with spanner -T20028-.
–  Move the piston of the respective cylinder to “bottom dead centre”.
   
–  Fit assembly device -T20034- with pressure tool -T20034/27-.
–  Thread pressure hose -T20033- into the sparkplug hole.
–  Adjust the hose to a minimum air pressure of 6 bar and remove the valve springs.
–  Remove the valve stem seals with the -T20058-.
  E15-0042

Valve stem seals: replacing|Install > < Valve stem seals: replacing