For work carried out on the fuel supply/injection system, the “5 rules” for cleaning must be carefully followed: |
t
| Thoroughly clean the connections and their surrounding areas before opening them. |
t
| Place the removed parts on a clean surface and cover them. ¡Do not use cloths with loose fibres! |
t
| If repairs are not carried out immediately, the removed components must be covered or stored with great care. |
t
| Only fit clean components: Remove replacement parts from their packaging just before fitting them. Do not fit components which were stored without packaging (for instance, in the toolbox, etc.). |
t
| The system is open: If possible, avoid using compressed air. If possible, do not move the vehicle. |
|
|
|