Leon Mk2
|
1 - | Radiator |
q | Removing and installing → Chapter |
q | Renew coolant after replacing cylinder head gasket |
2 - | O-ring |
q | Renew |
3 - | Upper coolant hose |
q | is fixed to the radiator with a clamp |
q | Check that it is seated securely |
q | Coolant hose connection diagram → Chapter |
4 - | Air duct |
5 - | 10 Nm |
6 - | Auxiliary fan |
q | In vehicles with optional equipment |
7 - | Securing clip |
q | Check that it is seated securely |
8 - | Support |
q | For electric fan |
9 - | Connector |
10 - | Radiator fan |
11 - | Towards thermostat cover |
q | Coolant hose connection diagram → Chapter |
12 - | Expansion tank |
q | Cooling system seal: check using the coolant tester -SAT 1274-, adaptor -VAG 1274/8- and adaptor -VAG 1274/9- → Chapter |
13 - | Plug |
q | Pressure relief valve in cover: check using the coolant tester -SAT 1274- and adaptor -VAG 1274/9- → Chapter |
14 - | Support |
q | To connect to fan terminal |
15 - | Lower coolant hose |
q | is fixed to the radiator with a clamp |
q | Check that it is seated securely |
q | Coolant hose connection diagram → Chapter |
16 - | Radiator fan thermo-switch -F18-, 35 Nm |
q | For electric fan |
q | Switching temperatures: |
t | 1st gear engaged: 92..00.97 °C, disengage: 84.0.91 °C |
t | 2st gear engaged: 99..0.105 °C, disengage: 91..98 °C |
17 - | Support |
q | For radiator |
q | Note installation position |
q | Note that there are various versions |
18 - | 10 Nm |