| –
| Use a spanner on the securing bolt swivel tensioning roller in direction of arrow. |
Note | t
| Before fitting the Poly-V belt, ensure that all mechanical assemblies [alternator and air conditioner (heating) compressor, transfer pump] are securely installed. |
| t
| When fitting the Poly-V belt, ensure that it is fitted with the correct direction of rotation and that it is correctly seated on the pulleys. |
| –
| First fit the Poly-V belt onto the crankshaft pulley and lastly onto the tensor roller. |
| –
| Start engine and check that belt runs properly. |
|
|
|
