Leon Mk2
Oil filter bracket with oil cooler: Assembly overview |
1 - | Sealing cap |
q | 25 Nm. |
2 - | O ring |
q | Replace |
3 - | O ring |
q | Replace |
4 - | O ring |
q | Replace |
5 - | Oil filter element |
q | See note → Anchor |
q | removing and fitting → Booklet301 |
6 - | Engine oil cooler |
q | See note → Anchor |
q | Coolant hose schematic diagram → Chapter. |
q | Removing and installing → Chapter. |
q | If renewed, refill system with fresh coolant |
7 - | Bolt. |
q | 11 Nm. |
8 - | gaskets |
q | Replace |
9 - | Bolt. |
q | Replace |
q | Tightening torque and sequence → Fig. |
10 - | Oil filter bracket |
q | With integrated oil retention valve |
q | Removing and installing → Chapter. |
11 - | gaskets |
q | Replace |
Note
|
stage: | Bolts | Tightening torque/angle specification |
1. | -Arrows - | 14 Nm in diagonal sequence |
2. | -Arrows - | Turn 90° further using diagonal sequence |