seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Checking fuel pump > < Removing and installing fuel delivery unit

Leon Mk2

Removing and installing fuel gauge senderG
Removing and installing fuel gauge sender -G-
t  Removing → Anchor
t  Installing → Anchor
Removing
–  Remove fuel delivery unit → Chapter.
   
–  Push the fuel level sender -G- slightly inwards in the -direction of the arrow- and at the same time remove upwards in the -direction of the arrow-.
  N20-10175
–  Unlock the connector tabs -1 … 3-, inserting a fine screwdriver through the holes -arrows- and disconnect the connectors.
Installing
Install in reverse order to dismantling, noting the following:
  E20-10028
Fitting position for fuel level indicator sender -G- cables
I - Brown Cable
II - Blue Cable
III - Black Cable
  Note
When mounting the fuel level sender -G- on the supply unit, make sure that the cables are correctly positioned.
–  Insert the fuel gauge sender -G- into the guides on fuel delivery unit and press upwards until it clicks into place.
  E20-10029

Checking fuel pump > < Removing and installing fuel delivery unit