SEAT Workshop Service and Repair Manuals

Separating engine from gearbox Special tools and workshop equipment required

t  Hooks -10 - 222 A /2-

t  Workshop hoist -VAS 6100-

t  Lifting tackle -T40013-

Procedure l  Engine/gearbox assembly removed and attached to engine bracket -T10012-. –  Unscrew bolts -arrows- and remove gearbox support.

–  Unscrew bolts -1- and -2- and take starter off gearbox.

Vehicles with four-wheel drive: –  Unscrew bolts -arrows 2, 3- for bevel box bracket.

Continuation for all vehicles: –  Attach lifting tackle -T40013- to gearbox and close lock. –  Attach workshop crane -VAS 6100- with hooks -10 - 222 A /2- to lifting tackle.

–  Unscrew bolts -1, 2, 5, 6, 7, 8- from gearbox to engine connection. –  Pull gearbox off engine.