seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Engine: fitting > < Engine and direct shift gearbox: Separate

Leon Mk2

Attaching engine to repair stand
Attaching engine to repair stand
Consult the equivalence table for tools and equipment according to applicability among Seat / VW / Audi / Skoda → Chapter.
   
Special tools and workshop equipment required
t  counterhold -VW 540-, see equivalent → Anchor
t  Lifting tackle -3033-, see equivalent → Anchor
t  Engine and gearbox lifter -VAS 6095-, see equivalency → Anchor
t  Workshop crane -VAS 6100-, see equivalent → Anchor

Operation process
l  Gearbox is separated from engine
   
–  Hook the support tool -3033- on the engine and on the workshop crane -VAS 6100-, as shown in the figure.
Flywheel end: Position 4.
Vibration damper end: Position 8.
  N10-10263
–  Fasten the engine by using the securing tool -VW 540- on the engine and gearbox support -VAS 6095-.
  A10-0766

Engine: fitting > < Engine and direct shift gearbox: Separate