seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Toothed belt: Assembly overview > < Cylinder head cover: Removing and installing

Leon Mk2

Seals of the injectors: Removing and installing
Seals of the injectors: Removing and installing
t  Seals of the injectors: Removing → Anchor
t  Seals of the injectors: Installing → Anchor.
Consult the equivalence table for tools and equipment according to applicability among Seat / VW / Audi / Skoda → Chapter.
Special tools and workshop equipment required
   
t  Carrier -3390-, see equivalent → Anchor
  W00-0173
Removing .
–  Remove the cylinder head cover → Chapter.
–  Press out seal for injector using carrier -3390- and short extension -1- from bottom to top.
  A15-10884
Fitting .
–  Press in new seal for injector using carrier -3390- and short extension -1- from top to stop.
–  Install the cover for the roller rocker fingers → Chapter.
  A15-10883

Toothed belt: Assembly overview > < Cylinder head cover: Removing and installing