seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Oil sump: Removing and installing > < Sump, oil pump: Assembly overview

Leon Mk2

oil level and oil temperature senderG266: Removing and installing
oil level and oil temperature sender -G266-: Removing and installing
t  oil level and oil temperature sender -G266-: Removing → Anchor
t  oil level and oil temperature sender -G266-: Installing → Anchor.
   
Removing .
–  Draining engine oil → Booklet101.
–  Unplug connector -3-.
–  Remove bolts -1- and detach the oil level and oil temperature sender -G266--item 4-.
Fitting .
l  Tightening torque → Anchor
Installation is carried out in reverse order, noting the following:
  Note
Renew seal -2- and self-locking bolts -1-.
–  Top up with engine oil and check level → Booklet101.
  A17-0294

Oil sump: Removing and installing > < Sump, oil pump: Assembly overview