seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Supercharger pressure senderG31/intake air temperature senderG42: Removing and installing > < Installing hose connections with corrugated pipe and hose clips

Leon Mk2

Intercooler system components: Assembly overview
   
Intercooler system components: Assembly overview
1 - Air intake hose
q   »Hot« side, top
2 - Left air pipe
q   »Hot« side
3 - Coupling
4 - 9 Nm
5 - Grommet
q   Replace in case of damages
6 - Air intake hose
q   »Hot« side, bottom
7 - Gasket
8 - Intercooler system
q   Removing and installing → Chapter
9 - Gasket
10 - 5 Nm
11 - Bush
12 - Bush
13 - Air intake hose
q   »Cold« side, bottom
14 - Air intake hose
q   »Cold« side, top
15 - Air pipe (right side)
q   »Cold« side
16 - Bolt
q   5 Nm
17 - Charge air pressure sender -G31-/intake air temperature sender -G42-
q   Removing and installing → Chapter
18 - O ring
q   Renewing

   
Installing air hoses with screw-type clips
  Note
In order to be able to securely attach the air hoses on their connections, the worm screws of the used hose clips have to be sprayed with penetrating spray before installing.
Specified torques for
1 - Screw clamp -a- = 13 mm wide: 5.5 Nm
2 - Hose clamp-b- = 9 mm wide: 3 Nm
  A21-10396

Supercharger pressure senderG31/intake air temperature senderG42: Removing and installing > < Installing hose connections with corrugated pipe and hose clips