| Connectors for Lambda probes |
| 1 - | Activated charcoal filter solenoid valve 1 -N80- |
| 2 - | Lambda probe, after catalytic converter -G130- and Lambda probe heater 1, after catalytic converter -Z29- |
| 3 - | Lambda probe -G39- and Lambda probe heater -Z19- |
Note | t
| Threads of new Lambda probes are already coated with assembly paste; the paste must not get into the slots on the probe body. |
| t
| In the case of a used Lambda probe grease only the thread with high-temperature paste. The paste must not get into the slots on the Lambda probe body. High-temperature paste → Electronic parts catalogue. |
| t
| When assembling, the lambda probe cable must be fixed in its original position to avoid contact with the exhaust pipe. |
| Removing and installing Lambda probe -G39- and Lambda probe heater -Z19- → Chapter. |
| Lambda probe after catalytic converter -G130- and Heater for lambda probe 1, after the catalytic converter -Z29-: Removing and installing → Chapter. |
|
|
|
