seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Using testers and measuring instruments during a road test > < Procedure before opening high-pressure section of injection system

Leon Mk2

Working on the cooling system
Working on the cooling system
When working on the coolant system take note of the following:
  WARNING
Hot coolant and vapours can cause burns!
t  When the engine is hot the cooling system is under pressure.
t  To reduce the system charge pressure, cover the expansion tank plug with a rag and open carefully.
  Caution
Overheating can occur if the filler cap is not fitted properly.
The filler cap must engage positively and audibly when it is closed.
   

Using testers and measuring instruments during a road test > < Procedure before opening high-pressure section of injection system