seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Ignition system: Assembly overview > < General information about the ignition system
Safety measures
Safety measures
To prevent injuries to persons and/or serious damage to the fuel injection and ignition system, the following must be noted:
t  Do not touch or remove the ignition coils with output stage while the engine running or idling.
t  The ignition must be switched off before connecting or disconnecting injection or ignition system wiring or tester cables.
If in the test drives it is necessary to use the tester units, take note of the following:
t  Testers and measuring instruments must always be secured to the rear seat and operated by a 2nd person from this location.
If test and measuring instruments are operated from front passenger's seat and the vehicle is involved in an accident, there is a possibility that the person sitting in this seat may receive serious injuries when the airbag is triggered.
   

Ignition system: Assembly overview > < General information about the ignition system