Leon Mk2
Diagram of coolant hose connections |
1 - | Radiator/cooler |
q | Removing and installing → Chapter |
q | Renew coolant after replacing cylinder head gasket |
2 - | Coolant pump -V50- |
3 - | Turbocharger return hose |
4 - | Coolant distribution housing |
q | With thermostat |
5 - | Coolant pump |
q | Removing and installing |
6 - | Cylinder head and cylinder block |
q | Renew coolant after replacing cylinder head gasket |
7 - | Turbocharger |
q | Removing and fitting, vehicles with engine identification letters BWA → Chapter |
q | Removing and fitting, vehicles with engine identification letters BWJ, CDLD, CDLA → Chapter |
8 - | Expansion tank |
Note
When replacing the expansion tank and during maintenance work, care must be taken that the silicate cartridge → Electronic parts catalogue is always located in the expansion tank. The silicate cartridge must not be removed. |
q | With cap |
q | Testing pressure relief valve in filler cap → Item |
9 - | Heat exchanger for heater |
q | Renew coolant after replacing cylinder head gasket |
10 - | Flexible hose |
q | Only with automatic Gearbox |
11 - | ATF cooler |
q | Only with automatic Gearbox |
12 - | Flexible hose |
q | Only with automatic Gearbox |
13 - | Water hose connection |
14 - | Engine oil cooler |
15 - | Intake manifold |
q | Removing and installing → Chapter |