seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Fuel pump: check > < Fuel delivery unit: Removing and installing

Leon Mk2

Removing and installing fuel gauge senderG
Removing and installing fuel gauge sender -G-
t  Removing → Anchor
t  Installing → Anchor
Removing
–  Remove fuel delivery unit → Chapter.
   
–  Move the fuel gauge sender -G-up and to the side.
  N20-10175
–  If the sender cannot be removed, the retaining lugs -arrows- must be pushed to the side a little.
–  Note the colours of the lines for fitting.
  A20-10067
–  Unlock and remove the plug connectors -1 - 3-. Then lift the securing hooks of the electrical connector.
  A20-10431
Installing
–  Plug in the connectors -1 ... 3-. Note the colour identification.
–  Pull on the connections to check if they have been connected correctly.
–  Insert the fuel gauge sender -G- into the guide on fuel delivery unit and press downward until it clicks into place.
–  Install fuel delivery unit → Chapter.
  A20-10431

Fuel pump: check > < Fuel delivery unit: Removing and installing