seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Removing and installing air filter element > < Part II intake pipe - Assembly overview
Air filter - Assembly overview (Altea, Altea XL, Leon)
Air filter - Assembly overview (Altea, Altea XL, Leon)
Removing and fitting air filter → Chapter
   
1 - Top part of air cleaner
2 - 1.6 Nm
q   Tighten with the torque screwdriver -VAS 6494-
3 - 1.6 Nm
q   Tighten with the torque screwdriver -VAS 6494-
4 - Retainer
5 - Filter element
q   Removing and installing → Chapter
6 - Bonded rubber bush, 8 Nm
q   With safety screw
7 - Waterproof strips
q   If this is damaged, replace it
8 - Air filter lower part
q   Removing and installing → Chapter
9 - Rubber bearing
10 - Inlet connection
q   With boot
11 - 3 Nm
12 - Intake channel
13 - 1.6 Nm
q   Tighten with the torque screwdriver -VAS 6494-
14 - Spring-type hose clip
q   Removing and installing with the pliers -VAS 6340-
15 - Suction hose
16 - Vacuum hose
q   If this is damaged, replace it
q   From the cylinder head cover

   

Removing and installing air filter element > < Part II intake pipe - Assembly overview