| –
| Remove bolt -1- from bracket -2- for air filter element -3-. |
| –
| Remove the support -2-. |
| –
| Remove air filter element -3-. |
Note | t
| Genuine filter cartridges must always be used for the air filter. |
| t
| The brackets for the hoses and the supercharger air system tubes must be free from oil and grease for fitting. When fitting, do not use lubricants that contain silicon. |
| t
| The air filter housing elements must be clean. |
| t
| Upon blowing the air filter housing with pressurised air take note of the following: To prevent malfunctions, cover all critical parts of the engine air intake tract with a clean cloth. |
| t
| Please observe requirements for disposal. |
| –
| Check for salt residue, dirt and leaves in air intake hose (engine intake side). |
| –
| Check for dirt in air intake hose from air duct. |
| –
| Clean the water drainage pipe and the bottom section of air filter. |
| –
| When installing the air filter insert, check that it is properly centred in the retainer in the air filter housing. |
| –
| Carefully and without force, place the top air filter element on the bottom element. Make sure that both sealing strips have been inserted → Item. |
| Installation is carried out in reverse order. |
|
|
|
