–
| Use fitting tool -T20081B/1- and press guide sleeve-oil seal assembly until the oil seal is in place. Use the camshaft sprocket securing bolt to do this. |
–
| Remove guide sleeve -T20081B/2-. |
For fitting, the operations are carried out in reverse order, taking the following into account: |
–
| Fit the camshaft cogwheel. For this, immobilise it using the retention tool -T20018A- and tighten the new attachment bolt to the recommended torque → Item. |
Fit the notched belt and adjust the distribution time → Chapter. |
|
|
|