Leon Mk2
Assembly overview - parts of cooling system, body side |
1 - | Coolant hose |
q | To top of expansion tank |
q | Coolant hose schematic diagram → Chapter. |
2 - | Coolant hose |
q | To bottom of expansion tank |
q | Coolant hose schematic diagram → Chapter. |
3 - | Clamp |
4 - | Electric connector |
5 - | Sealing cap |
q | Check using cooling system tester -V.A.G 1274 B- and adapter for cooling system tester -V.A.G 1274/9-. |
q | At a pressure of 1.4 ... 1.6 bars pressure release valve should open. |
6 - | 5 Nm |
7 - | Expansion tank |
q | Test cooling system for leaks using cooling system tester -V.A.G 1274 B- and adapter for cooling system tester -V.A.G 1274/8-. |
8 - | Coolant hose |
q | Coolant hose schematic diagram → Chapter. |
9 - | Radiator/cooler |
q | Removing and installing → Chapter. |
q | If renewed, change coolant in entire system |
10 - | Cowling |
q | with radiator fan -V7- and radiator fan 2 -V177- |
11 - | 5 Nm |
12 - | Electric connector |
13 - | Upper coolant hose |
q | Coolant hose schematic diagram → Chapter. |