SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Lambda probeG39: Removing and installing >
< Exhaust manifold: Removing and installing
Leon Mk2
Power unit
4 cylinder injection engine (1.6 l engine, roller rocker arms)
Exhaust system
Exhaust system (Engine code CMXA)
Exhaust system: Align so that components are free of stress
Exhaust system: Align so that components are free of stress
Exhaust system: Align so that components are free of stress
l
The exhaust system must be installed cold.
–
Loosen the bolted connections of front double clamp.
–
Move the exhaust system until the tension in the right-hand rear silencer bracket is a = 5 ... 11 mm.
–
Install double clamp so that the bolt end
-arrow-
does not project over the clamp lower edge.
l
Bolted connection must point to the right.
–
Tighten bolt connections of double clamps evenly to 25 Nm.
Power unit
4 cylinder injection engine (1.6 l engine, roller rocker arms)
Exhaust system
Exhaust system (Engine code CMXA)
Exhaust system: Align so that components are free of stress
Lambda probeG39: Removing and installing >
< Exhaust manifold: Removing and installing