| –
| Moisten the new O-ring -2- with coolant. |
| –
| Position the thermostat -1- in the connection nozzle -3- and rotate 1/4 of a turn (90°) to the right. |
| –
| Position the connection nozzle -3- with the thermostat -1- on the engine block and tighten the bolts -4- to 15 Nm. |
| Fitting operations are carried out in reverse order to removal operations, noting the following: |
Note! | t
| When refitting the battery, activate all of the vehicle equipment (radio/radio and navigation system, clock, electric windows) according to: → Instruction Manual. |
| t
| Other measures after reconnecting the voltage supply → Chapter. |
|
|
|
