Leon Mk2
Vehicles with engine identification letters BBX |
1 - | Deflector cover for hot air |
2 - | Lambda probe -G39- and heating for lambda probe -Z19-, 50 Nm |
q | Checking: → VAS 5051; Vehicle self-diagnosis |
q | Grease thread only with “G5”. “G5” must not get into the slots on the probe body |
q | Remove and fit with the lambda probe spanner -U-40080- |
q | If the sealing ring is leaking, nip open and replace the o-ring |
3 - | 10 Nm |
4 - | 25 Nm |
5 - | 25 Nm |
q | Replacement |
q | Apply -G 052 112 A3- for fitting the bolts immediately |
6 - | 25 Nm |
7 - | Exhaust manifold support |
q | Attached to cylinder block |
8 - | Forward exhaust tube with catalytic converter |
q | With articulated section |
q | Do not bend the articulated section more than 10°, otherwise it could be damaged |
q | Protect against impact or knocks |
q | Fit and adjust the exhaust system without tension → Chapter |
9 - | Suspension element |
q | Replace if damaged. |
10 - | 40 Nm |
11 - | Gasket |
q | replace |
12 - | Exhaust manifold |
13 - | Gasket |
q | replace |
14 - | Exhaust manifold support |