seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Engine: securing the engine to engine bracket > < Engine and gearbox: Separate

Leon Mk2

Engine and DSG gearbox: Separate
Engine and DSG gearbox: Separate
Consult the equivalence table for tools and equipment according to applicability among Seat / VW / Audi / Skoda → Chapter.
Special tools and workshop equipment required
   
t  counterhold -T20186-, see equivalent → Anchor
t  Workshop crane
Operation process
  L00-10018
Engine unit dismounted and placed over the counterhold -T20205- .
l 
–  Uncouple the coolant flexible hoses -arrows- of the gearbox oil radiator.
  A10-10001
–  Unscrew bolts -1- and -2-.
–  Remove the gearbox ignition.
  Note
This is shown in the figure with the gearbox removed..
  N27-0019
–  Unscrew the bolts -1- and -3 … 10- of the gearbox / engine fastener.
  A34-10045
–  Place the support tool -T20186- on the gearbox, as shown in the illustration.
  WARNING
When transporting, take care not to damage the transmission oil radiator.
–  Separate gearbox from engine.
  E34-10062

Engine: securing the engine to engine bracket > < Engine and gearbox: Separate