seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Fuel tank with accessory parts - Component overview (front wheel drive) > < Rules for cleanliness

Leon Mk2

Fuel supply system
Fuel supply system
t  Fuel tank with accessory parts - Component overview (front wheel drive) → Chapter
t  Fuel tank: draining → Chapter.
t  Fuel tank with accessory parts: removing and fitting → Chapter
t  Fuel supply unit and fuel level indicator sender - Component overview (front wheel drive vehicles) → Chapter
t  Checking fuel pump → Chapter.
t  Removing and installing fuel delivery unit → Chapter.
t  Fuel gauge senders -G-: Checking → Chapter
t  Fuel gauge sender -G-: removing and installing → Chapter
t  Fuel tank with accessory parts - Component overview (four wheel drive) → Chapter
  Note
t  Secure all hose connections with the correct hose clips (same as original equipment) → Spare parts catalogue.
t  Always replace the O-rings and the gaskets during fitting work.
  WARNING
t  Fuel system is under pressure! Before opening the system place a cloth around the connection. Then release pressure by carefully loosening the connection.
t  For those vehicles fitted with an injector pump, the temperature of the fuel and the fuel lines may reach up to 100 ºC in extreme cases. Before opening the duct connections, allow the fuel to cool otherwise there is a risk of severe burns.
t  Wear protection gloves.
t  Wear eye protection.
   

Fuel tank with accessory parts - Component overview (front wheel drive) > < Rules for cleanliness