Leon Mk2
Fuel tank with accessory parts - Component overview (front wheel drive) |
1 - | 26 Nm |
2 - | Securing strap |
q | removing and fitting → Chapter |
q | Fitting position: Fixing point (holes) point in direction of travel |
3 - | Heat shield |
q | For fuel tank |
q | May change size depending of model |
4 - | Fuel supply line |
q | Black |
q | To fuel filter |
q | Do not kink |
q | Install on fuel tank |
5 - | Fuel return line |
q | Blue colour |
q | To fuel radiator |
q | Do not kink |
q | Install on fuel tank |
6 - | Electrical connector |
q | For fuel pump (pre-supply pump) -G6- and fuel gauge sender -G- |
7 - | Seal |
q | If this is damaged, replace it |
8 - | Sealing cap |
q | Held using anti-loss fastener on the fuel tank cover unit |
9 - | Earth connection |
q | To divert electrostatic charge |
q | Installation position → Fig. |
q | Ensure that connector is seated properly and secure lines with the collared securing bolt for fuel filler neck → Item |
q | After installation, use an ohmmeter to check the electrical connection between the metal ring on the fuel filler neck and a bare metal part on the body - specification: approx. 0 Ω |
10 - | Seal bolt -11 Nm |
q | Secures fuel filler neck and earth connection → Item |
11 - | Fuel tank |
q | removing and fitting → Chapter |
12 - | 26 Nm |
13 - | Lock washer |
q | Turn to the left to remove |
q | Assembly: tighten to 2 Nm |
|