Leon Mk2
Parts of cooling system, body side |
1 - | Radiator |
q | Removal and installation → Chapter |
q | After replacing, renew all coolant |
2 - | Lock carrier |
3 - | Radiator fan |
4 - | 10 Nm |
5 - | Support |
q | For electric fan |
6 - | Connector |
7 - | Lower coolant hose |
q | Coolant hose connection diagram → Chapter |
8 - | Upper coolant hose |
q | Coolant hose connection diagram → Chapter |
9 - | Expansion tank |
q | Carry out leak test of cooling system with cooling system tester -V.A.G 1274- and adapter -V.A.G1274/3- |
q | Test pressure 1.4...1.6 bar |
q | Observe markings → Chapter, coolant: draining and filling cooling system |
10 - | Sealing cap |
q | Check with cooling system tester -SAT 1274- and adapter -SAT 1274/4- |
q | The pressure relief valve must open at a pressure of 1.4...1.6 |
11 - | Casing |
12 - | from thermostat housing |
q | Coolant hose connection diagram → Chapter |
13 - | To thermostat housing |
q | Coolant hose connection diagram → Chapter |
14 - | Thermo-switch -F18-, 35 Nm |
q | For electric fan |
q | Switching temperatures: 1a speed on: 92...97 °C off: 84...91 °C 2a speed on: 99...105 °C off: 91...98 °C |