Leon Mk2
| Parts of the ABS system on the rear axle: remove and install (vehicles with disc brakes) |
| 1 - | Axle body |
| 2 - | Brake line |
| 3 - | Hand brake cable |
| 4 - | Cross-head bolt |
| q | 4 Nm |
| 5 - | Brake disc |
| 6 - | Plug. |
| q | Removal and installation of vehicles with disk brakes → Running gear, axles, steering; Rep. Gr. 42 |
| 7 - | Twelve-sided, self-locking nut |
| q | 70 Nm + 30° |
| q | Replace after each removal |
| 8 - | Wheel housing with wheel bearing and sensor ring |
| q | Sensor ring integrated into bearing oil seal |
| q | Always replace entire unit |
| q | Removal and installation of vehicles with disk brakes → Running gear, axles, steering; Rep. Gr. 42 |
| 9 - | Bolt and washer |
| q | 30 Nm + 90° |
| 10 - | Cover plate |
| 11 - | Axle connection |
| 12 - | ABS rev. sensor |
| q | Verified by self-diagnosis |
| q | Before fitting the sensor, clean the inner surface of the hole and apply solid lubricant paste → Parts catalogue. |
| q | Removal and fitting, vehicles with disc brakes → Chapter |
| 13 - | Hexagon socket head bolt |
| q | 8 Nm |
