seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Pedal gear, brake pedal: general assembly diagram > < Removal:

Leon Mk2

Fitting and adjusting
Fitting and adjusting
  Note
Before installing the brake light switch -F- and brake pedal switch -F47-, the rocker contact surface on the brake pedal must be lubricated with polycarbamide grease → Parts catalogue.
–  Remove completely the push rod of the brake light switch -F- and brake pedal switch -F47 -.
–  Connect the plug of the brake light switch -F- and brake pedal switch -F47 -.
–  Support the brake pedal so that it remains in the rest position.
   
–  Guide the switch through the fitting opening and fully secure it turning it 45º to the right.
  Note
In order for the switch locking mechanism to turn, return the switch to the lower side of the compartment.
–  Operate the brake pedal, all the brake lights switch on. Release the brake pedal, all the brake lights switch off.
–  Install footwell cover on driver's side → removing and installing footwell cover driver's side; Rep. Gr.68.
  E45-0028

Pedal gear, brake pedal: general assembly diagram > < Removal: