The following process is only required to replace the brake calliper or for the repair work described below. |
–
| Hang the handbrake cable out of the lever on the brake calliper. |
–
| Remove the spring clip and pull the handbrake cable out of the lever on the brake calliper. |
–
| Attach the bleeding hose of the bleeding bottle -SAT 1175B/1- on the bleeding bolt of the brake caliper and open the bleeding bolt. |
–
| Apply brake pedal depressor -V.A.G 1869/2-. |
–
| Close the bleeding valve and remove -SAT 1175B/1- remove the bleeding bottle. |
|
|
|