Leon Mk2
Assembly overview - Hydraulic unit, right-hand drive |
Note!
Pump and valve block must not be separated from one another. |
1 - | Bracket |
q | Is secured to the mounting plate |
2 - | Self-locking nut, 10 Nm |
q | Always renew |
3 - | Rubber damper |
4 - | Self-locking nut, 25 Nm |
q | Always renew |
5 - | Stud, 8 Nm |
6 - | ABS hydraulic unit |
7 - | Brake pipe connection |
q | Hydraulic unit to front left brake caliper |
8 - | Brake pipe connection |
q | Hydraulic unit to rear right wheel cylinder |
9 - | Brake pipe connection |
q | Hydraulic unit to rear left wheel cylinder |
10 - | Brake pipe connection |
q | Hydraulic unit to front right brake caliper |
11 - | Control unit |
12 - | Heat shield |
13 - | Bolt, 8 Nm |
14 - | Clip |
15 - | Brake pipe connection |
q | Master brake cylinder/secondary piston circuit to hydraulic unit |
16 - | Brake pipe connection |
q | Brake master cylinder/primary piston circuit to hydraulic unit |
|
|
|