seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
III - ABS system components on the rear axle: removal and fitting (vehicles with drum brakes from 09.00) > < Rear revolution sensor cables: removal and fitting (vehicles with drum brakes up to 08.00)

Leon Mk2

Check the revolution sensor rotor on the rear axle (vehicles with drum brakes up to 08:00)
Check the revolution sensor rotor on the rear axle (vehicles with drum brakes up to 08:00)
Special tools and workshop equipment required
   
t  Torque wrenches -SAT 8010-
Checking process
–  Raise the vehicle.
–  Unbolt wheel.
–  Remove brake drum:Before removing, retract the brake linings through the wheel bolt threaded holes → Fig.
–  Make sure the rotor is not dirty or damaged.
–  If the rotor is damaged, remove and change the wheel hub with the rotor → Chapter.
  W00-2760

III - ABS system components on the rear axle: removal and fitting (vehicles with drum brakes from 09.00) > < Rear revolution sensor cables: removal and fitting (vehicles with drum brakes up to 08.00)