Leon Mk2
Brake pedal - Assembly overview |
Caution
|
Note!
Grease all mountings before installing with grease -G 000 602-. |
1 - | Mounting bracket |
2 - | Hexagon bolt, 25 Nm |
3 - | Brake pedal switch -F47- |
q | For engine control unit |
q | Checking or adjusting → Rep. Gr.24 |
4 - | Self-locking hexagon nut, 25 Nm |
q | Qty. 5, to secure mounting bracket to brake servo |
5 - | Brake light switch |
q | Removing and installing |
q | Before installing brake light switch, connect brake pedal to brake servo push rod |
6 - | Securing clip |
q | Ensure seated securely |
7 - | Pivot pin for brake and clutch pedals |
q | Installation position: The groove -arrow- is located on the clutch pedal side. |
8 - | Brake pedal |
9 - | Mounting bush |
q | To support casing |
10 - | Pad |
11 - | Clutch pedal |
q | Removing and installing → Rep. Gr.30 |
12 - | Securing clip |
q | Ensure seated securely |
13 - | Hexagon nut, 25 Nm |
14 - | Support |