–
| First press brake pedal in direction of brake servo and hold. |
–
| Fit device -U-40015- and pull towards drivers seat, when doing this counter-hold on brake pedal (pedal must not be able to move to rear at this moment). This will press the retainers -3- of the mounting off the ball head of the push rod -2-. |
Note! For ease of illustration separating the brake pedal from the brake servo is shown with the pedal cluster removed. |
–
| Pull device -U-40015- and brake pedal together towards drivers seat. (The brake pedal will then be pulled off the ball head of the push rod). |
|
|
|