| –
| Pull protective foil off outer brake pad backplate. |
| –
| Fit outer brake pad on brake carrier. |
| –
| Insert inner brake pad with retaining spring in brake caliper (piston). |
| When positioning the brake caliper, ensure that the brake pad does not stick to the brake caliper housing before it is positioned correctly. |
| Do not damage adhesive surface. |
| –
| Bolt brake caliper to brake carrier with both guide pins. |
| –
| Fit both protective caps. |
| –
| Insert retaining spring into brake caliper. |
Note! | t
| After changing brake pads, firmly depress brake pedal several times with vehicle stationary, so that the brake pads are properly seated in their normal operating position. |
| t
| After changing brake pads check brake fluid level. |
|
|
|
