seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Swinging arm bonded rubber bearing: replacement > < Removing

Leon Mk2

Fitting
Fitting
The assembly operations are carried out in the reverse order of the disassembly with some exceptions.
  Note
The ball joint is fitted centred on the swinging arm elongated holes.
   
Tightening torques:
Swinging arm to ball joint attachment
Use new bolts		20 Nm + 1/4 turn (90º)
Front bolt of the swinging arm
Rear bolt of the swinging arm
Use new bolts		70 Nm + 1/4 turn (90º)
Ball joint attachment to the bearing housing
Use a new nut		50 Nm
From link rod to the stabiliser bar
Use a new bolt		30 Nm
Attaching the wheel110 Nm

   

Swinging arm bonded rubber bearing: replacement > < Removing