seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Swinging arm: removing and fitting|Fitting > < Swinging arm: removing and fitting

Leon Mk2

Removing
Removing
–  Lift the vehicle until the front axle is free of weight.
–  Remove wheel.
–  Remove the sound proofing element when fitted.
   
–  Extract the bolt -1- securing the ball joint to the bearing housing.
–  Extract the nut -2- joining the rod from the stabiliser bar to the subframe.
–  Extract the swinging arm along with the ball joint from the bearing housing.
  E40-10022
–  Extract the bolts -1- and -2- and separate the swinging arm from the subframe along with the ball joint.
–  Separate the ball joint from the swinging arm.
  E40-0037

Swinging arm: removing and fitting|Fitting > < Swinging arm: removing and fitting