Leon Mk2
| Assembly overview: Shock absorber |
| 1 - | Shock absorber |
| q | Note the fitting angle between the rear axle and the shock absorber → Fig. |
| q | removing and installing → Chapter |
| q | Can be replaced separately. |
| q | Ensure that the shock absorber does not have any leaks or produce noise. |
| 2 - | Protective tube |
| 3 - | Elastic limit |
| 4 - | Ring |
| 5 - | Dust guard |
| 6 - | Bearing ring |
| 7 - | Separator tube |
| 8 - | Plate suspension spring |
| 9 - | Hexagonal nut |
| q | 20 Nm |
| 10 - | Protective hood |
