SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Shock absorber: Removing and installing|Fitting >
< Shock absorber: Removing and installing
Leon Mk2
Running gear
Running gear, axles, steering
Rear suspension, drive shaft
Repair the rear axle (vehicles with brake drums) / ock_absorber_removing_and_installing/">Shock absorber: Removing and installing
Removal
Removal
Removal
Vehicles with ABS
–
Pull connector
-1-
off revolution sensor.
–
Release the cable for the revolution sensor from the suspension strut
-arrow-
.
All vehicles (continued)
–
Remove the covering
-arrow-
from the boot.
–
Hold the rear axle down using the engine and gearbox lifter -SAT 1001-
–
Unscrew the rear axle of the shock absorbers
-arrow-
.
–
Lower the rear axle with the engine and gearbox lifter -SAT 1001- until the spiral springs can be removed.
–
Unscrew and remove the shock absorber from the interior with the countersupport -T20014- and the box-end wrench -T20012-
Running gear
Running gear, axles, steering
Rear suspension, drive shaft
Repair the rear axle (vehicles with brake drums) / ock_absorber_removing_and_installing/">Shock absorber: Removing and installing
Removal
Shock absorber: Removing and installing|Fitting >
< Shock absorber: Removing and installing