Leon Mk2
| Removing and fitting the airbag unit on the driver’s side (Vehicles up to 08.00) |
| 1 - | Steering column |
| 2 - | Connector |
| q | For the airbag unit |
| 3 - | Steering wheel |
| q | Removing and installing → Chapter |
| q | Remove and fit the retractor ring with the friction ring → Chapter |
| 4 - | Allen bolt |
| q | 7 Nm |
| q | Replace after removing |
| 5 - | Lower left part |
| q | For activating the horn |
| 6 - | Lower right part |
| q | For activating the horn |
| 7 - | Contact plate with cable |
| q | For activating the horn |
| 8 - | Hexagonal collar nut |
| q | 50 Nm |
| 9 - | Upper left part |
| q | For activating the horn |
| q | Always replace the upper parts in pairs |
| 10 - | Airbag |
| q | Removing → Chapter |
| q | Fitting → Chapter |
| 11 - | Upper right part |
| q | For activating the horn |
| q | Always replace the upper parts in pairs |
| 12 - | Torx bolts |
