Leon Mk2
| Steering column, steering mount: assembly overview |
Note| t | No welding or straightening work is allowed on the elements of the steering system. |
| t | Always replace any self-locking nuts and bolts. |
| t | Always replace corroded bolts/nuts. |
| Remove and fit the steering column with the steering mount → Chapter. |
| Dismantle and assemble the steering mount and the steering column → Chapter |
| 1 - | Support |
| 2 - | Pressure ring |
| q | With washer incorporated |
| 3 - | Steering lock housing |
| q | Removal and fitting the lock cylinder: → electrical system; Rep. Gr.94 |
| 4 - | Combination switch in steering column |
| q | Repairs: → electrical system; Rep. Gr.94 |
| 5 - | Upper pressure spring |
| 6 - | Multiple cog adapter socket |
| q | Releasing → Chapter |
| q | Insertion → Anchor |
| 7 - | Hexagonal collar nut |
| q | 50 Nm |
| 8 - | Rupture bolt |
| q | Tighten until the head is cut |
| q | For removal, drill. |
WARNING
|
| 9 - | Steering column, upper part |
| q | With steering lock auto lock: this cannot be disassembled |
| q | Above a torque of 100 Nm on the steering wheel, the steering column will turn with the steering wheel without damaging the locking pin |
| 10 - | Spring |
| 11 - | Bracket |
| q | Before fitting, cover the sliding side surfaces with MoS2. |
| 12 - | Lock plate |
| 13 - | Hexagonal nut |
| q | Left hand side thread |
| q | 8 Nm |
| 14 - | Hexagonal nut |
| q | 6 Nm |
| 15 - | Securing bolt |
| q | Left hand side thread |
| q | 22...24 Nm |
| 16 - | Thrust rod |
| 17 - | Bolt |
| 18 - | Washer |
| 19 - | Intermediate plate |
| 20 - | Steering mount |
| 21 - | Operation lever |
| 22 - | Pressure spring |
| 23 - | Support tool . |
| 24 - | Assembly point |
| 25 - | Security spring |
| 26 - | Lower part of column/axle articulation |
| 27 - | Nut with retainer |
| q | Remove the articulation cage and replace the nut |
| q | Do not reuse the cage |
| q | Use a self locking nut |
| 28 - | Hexagon head bolt |
| q | 25 Nm |
| 29 - | Lower bearing for the steering column |
| q | Detach the steering mount → Chapter |
| q | Insert using a plastic mallet |
| 30 - | Bracket |
| 31 - | Hexagonal nut |
| q | 6 Nm |
