Leon Mk2
Power steering box TWR brand: removing and fitting |
Note
t | Always renew self-locking bolts and nuts. No welding or adjustment work is allowed on the elements of the steering system. |
t | To grease the steering rack, use grease for the steering box -AOF 063 000 04-. |
t | Always renew self-locking bolts and nuts. |
t | Type: Hydraulic oil -G 002 000-. |
t | Quantity of oil in the system: approx. 0.8 l |
t | Except for the replacement of the track rods and dust guards, no other repairs have been foreseen The necessary data will be found → Chapter. |
1 - | 8 Nm |
2 - | Heat shield |
3 - | Seal |
4 - | Power steering sensor -G250- |
q | Removing and installing → Chapter |
5 - | 5 Nm |
6 - | 20 Nm + further 1/4 (90°) |
q | Replace after each removal |
7 - | Steering rod |
8 - | Pressure pipe |
9 - | Banjo bolt, 40 Nm |
10 - | Seal |
11 - | Union nut 30 Nm |
12 - | Seal |
13 - | Return hose |
14 - | Steering box |
q | removing and fitting → Chapter |
15 - | Subframe |
q | With groove as shown in the illustration, only if the front exhaust tube is placed below the subframe |
q | With groove, not shown in the illustration, only if the front exhaust tube is placed above the subframe |
16 - | 50 Nm + further 1/4 (90°) |
q | Replace after each removal |