seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing > < Verification of the hydraulic pump feed pressure

Leon Mk2

Steering box: removing and fitting
   
Steering box: removing and fitting
Special tools and workshop equipment required
t  Hydraulic lift -SAT 1040-
t  Torque wrench -SAT 8010-
t  Pliers -T20072-
t  Ball joint extractor -T20147-
t  Bracket -U-30025E-
t  Compression tool -U-30042-

   
t  Centre guides -T20163A -
Standards for fitting and removing: power steering box
  Note
t  Work on the power steering system requires a maximum of cleanliness.
t  Before loosening the joints, thoroughly clean the joins and their surroundings.
t  Place all removed parts on a clean surface and cover them if the repair is not to be terminated immediately.
t  Do not use cloths with loose threads!
t  Only remove spares from their packets immediately before fitting them.
t  Only use original parts.
  W00-2946

Removing > < Verification of the hydraulic pump feed pressure