Leon Mk2
Removing and installing driver's airbag unit |
1 - | Steering wheel |
q | Removing → Chapter. |
2 - | Connector |
3 - | Airbag unit |
4 - | Hexagon bolt |
q | 40 Nm |
q | Always renew after removing |
5 - | Torx bolt T30 |
q | 8 Nm |
q | Always renew after removing |
6 - | Bottom part of trim |
7 - | Foam tube |
8 - | Connector |
9 - | Coil connector with slip ring |
q | Removing → Chapter. |
– | Disconnect battery earth strap. |
– | Steering wheel → Item to centre position (wheels in straight-ahead position). |
– | Remove torx bolt T30 → Item. Remove airbag unit → Item from steering wheel and pull red connector → Item off airbag unit. |
Installation note: |
– | Switch on ignition. |
WARNING
|
– | Connect battery earth strap. |