↓ |
Check for pulling to one side, and to which side, during the test drive |
↓ |
If there is a pull, interchange the front wheels |
↓ |
Perform road test. |
The vehicle does not pull any more - END |
The vehicle pulls to the opposite side | The vehicle pulls to the same side |
↓ | ↓ |
Turn a front tyre on the wheel rim (in the opposite direction to the direction of rotation) | Interchange front wheels with rear wheels |
↓ | ↓ |
Perform road test. | Perform road test. |
The vehicle does not pull any more - END | The vehicle does not pull any more - END |
The vehicle pulls to one side | The vehicle pulls to one side |
↓ | ↓ |
Interchange front wheels with rear wheels | The vehicle pulls to the opposite side | No change |
↓ | ↓ | ↓ |
Perform road test. | Turn a front tyre on the wheel rim (in the opposite direction to the direction of rotation) | Check the alignment of the front and rear axles, adjusting where necessary. |
The vehicle does not pull any more - END | | If the alignment is correct, consult Product Behaviour |
The vehicle pulls to one side | | |
↓ | | |
Interchange the front tyres | | |
↓ | ↓ | |
Perform road test. | Perform road test. | |
The vehicle does not pull any more - END | The vehicle pulls to one side | The vehicle does not pull any more - END | |
| ↓ | The vehicle pulls to one side | |
| Fit new tyres on front axle | Fit new tyres on front axle | |
| ↓ | ↓ | |
| Perform road test. | Perform road test. | |
| The vehicle does not pull any more - END | The vehicle does not pull any more - END | |
| ↓ | ↓ | |
Vehicle pulls to one side, see product behaviour |