seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing driver side central locking switch F59 and front passenger side central locking switch F114 > < Removing and installing alarm horn H12 for anti-theft alarm system

Leon Mk2

Removing and installing left ultrasonic sensor for anti-theft alarm systemG170 and right ultrasonic sensor for anti-theft alarm systemG171
Removing and installing left ultrasonic sensor for anti-theft alarm system -G170- and right ultrasonic sensor for anti-theft alarm system -G171-
Removing:
–  Switch off ignition and all electrical consumers and remove ignition key.
–  Remove upper B-pillar trim → General body repairs, interior; Rep. Gr.70.
–  Release connector.
   
–  Press locking tabs -arrow- and pull ultrasonic sensor upwards out of B-pillar trim.
Installing:
  N96-0187
–  Slide ultrasonic sensor into guides in B-pillar trim until it engages.
–  Reconnect connector.
–  Install upper B-pillar trim → General body repairs, interior; Rep. Gr.70.
  N96-0188

Removing and installing driver side central locking switch F59 and front passenger side central locking switch F114 > < Removing and installing alarm horn H12 for anti-theft alarm system