seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Removing and installing central locking/anti-theft alarm system switch -F218- in rear lid > < Removing and installing left ultrasonic sensor for anti-theft alarm system G170 and right ultrasonic sensor for anti-theft al
Removing and installing driver side central locking switchF59 and front passenger side central locking switchF114
Removing and installing driver side central locking switch -F59- and front passenger side central locking switch -F114-
  Note!
t  The driver side central locking switch -F59- is installed in the driver door and the front passenger side central locking switch -F114- is installed in the front passenger door.
t  The procedures are similar for the left and right sides.
Removing:
–  Switch off ignition and all electrical consumers and remove ignition key.
–  Remove front door trim → General body repairs, interior; Rep. Gr.70.
–  Remove front door lock → General body repairs, exterior; Rep. Gr.57.
   
–  Unclip central locking/anti-theft alarm system switch -arrow- from lock housing by pressing fasteners on back of switch together.
Installing:
Install in reverse order of removal.
  N96-0189

Removing and installing central locking/anti-theft alarm system switch -F218- in rear lid > < Removing and installing left ultrasonic sensor for anti-theft alarm system G170 and right ultrasonic sensor for anti-theft al