seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing rear lid release switch E165 > < Removing and installing driver side central locking switch F59 and front passenger side central locking switch F114

Leon Mk2

Removing and installing central locking/anti-theft alarm system switch -F218- in rear lid
Removing and installing central locking/anti-theft alarm system switch -F218- in rear lid
Removing:
–  Switch off ignition and all electrical consumers and remove ignition key.
–  Remove rear lid trim → General body repairs, interior; Rep. Gr.70.
–  Disconnect switch connector.
–  Remove lock cylinder → General body repairs, exterior; Rep. Gr.55.
   
–  Lever off retaining plate for contact switch -1-.
–  Take contact switch -2- off lock cylinder housing -3-.
Installing:
Install in reverse order of removal.
  Note!
t  Ensure contact switch wiring is routed correctly on rear lid!
t  Install lock cylinder securing clip on handle recess before installing assembled lock cylinder. Then press lock cylinder through securing clip unit lock cylinder engages audibly.
t  Check installation position of contact switch by operating lock cylinder, before reinstalling the rear lid lock.
  N96-0183

Removing and installing rear lid release switch E165 > < Removing and installing driver side central locking switch F59 and front passenger side central locking switch F114