seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Renewing bulb of footwell light > < Left footwell lightW9 and right footwell lightW10

Leon Mk2

Removing and installing footwell light
Removing and installing footwell light
  Note
t  When removing and installing components that are in view (switches, covers, trim and so on), mask off areas in which tools (removal wedge -VAS 3409-, screwdriver) are used to lever out those components using commercially available tape.
t  Removal and installation of both footwell lights is performed in the same way and is described as follows for just one light.
Special tools and workshop equipment required
   
t  Removal wedge -VAS 3409-
  Note
t  When removing and installing components that are in view (switches, covers, trim and so on), mask off areas in which tools (removal wedge -VAS 3409-, screwdriver) are used to lever out those components using commercially available tape.
t  Removal and installation of both footwell lights is performed in the same way and is described as follows for just one light.
Removing:
–  Switch off ignition and all electrical loads, and pull out ignition key.
  W00-0016
–  Use removal wedge -VAS 3409- or suitable screwdriver to prise footwell light out of trim beneath glove compartment.
  N96-10151
–  Release and detach connector -arrow- and remove right footwell light -W10-.
Installing:
Installation is carried out in reverse order.
  N96-10150

Renewing bulb of footwell light > < Left footwell lightW9 and right footwell lightW10